Issues with SmartLink in SmartSDR v2.4.9

  • 1
  • Problem
  • Updated 3 weeks ago
Issues with SmartLink in SmartSDR v2.4.9 radio chooser with DAX and CAT not finding the radio, SmartSDR seems fine. 
Photo of WX7Y

WX7Y

  • 544 Posts
  • 98 Reply Likes

Posted 3 weeks ago

  • 1
Photo of Jim Gilliam

Jim Gilliam

  • 462 Posts
  • 71 Reply Likes

Did you try manually connecting to both the CAT and DAX?
Photo of Lynwood Wilson

Lynwood Wilson

  • 5 Posts
  • 0 Reply Likes
Strange, v2.4.9 doesn't show up in my 6400M, only in SmartSDR also.

Photo of Andreas Junge

Andreas Junge, Elmer

  • 42 Posts
  • 3 Reply Likes
You have to login into each program individually: SSDR, SDR-Cat, SDR-DAX 

Andreas, N6NU
Photo of WX7Y

WX7Y

  • 544 Posts
  • 98 Reply Likes
something was out of sink, when I connected to each program individually SmartSDR would logout of smartlink and un-register it self and DAX and CAT would show the radios in the chooser then if I reconnected the radio the other 2 would not show up in Radio chooser. 
I finally got both radio's in sync but had to un-register and log-out ALL three programs  and both radio's with ALL three radio chooser up and re-logged in and on the desk top I only had to resister the Radio's SmartLink on SmartSDR and the others followed suit. 
I think the trick is to un-register the radio's from SmartLink then do the upgrade then login and re-register smartlink after the Update.

Thanks for the response's
73's
Bret
WX7Y



Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 913 Posts
  • 169 Reply Likes
The issue here is, that SmartSDR stops working if I have registered SmartLink.
It just crashes on my Windows 7 notebook, I have to terminate it with my task manager.
If I unregister, all is fine.
I'll open a ticket.
73, Alex - DH2ID
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 913 Posts
  • 169 Reply Likes
Sorry, the issue seems not to be SmartLink, but my batch file!
I start all programs with a compiled batch file, containing the line:
"start SmartSDR.exe --serial=XXXX-XXXX-XXXX-XXXX"
This seems to crash SSDR. I've opened a ticket.

My workaround:
1. Start SSDR manually - this works on all PC's and notebooks and OS 7-10
2. Start all the programs with a compiled batch file:
    MiniDeluxe, JTAlertX with WSJT-X, HRDLog,Stacks and GridTracker
I will compile more batch files to start other program constellations.

73, Alex - DH2ID
(Edited)
Photo of Sergey, R5AU

Sergey, R5AU

  • 842 Posts
  • 110 Reply Likes
I have tested new 2.4.9  in SmartLink mode and  with OpenVPN:
really perfect, even with Latency up to 200ms and more ! i get FT8 QSO`s without trouble 

Win10
DIGI -> JTDX ->https://www.jtdx.tech/en/
F6700
Router - ASUS AC-3200

KUDOS !