Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Is Version V0.14.3 coming out today?

k0eoo
k0eoo Member ✭✭
edited June 2020 in SmartSDR for Windows

Answers

  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019
    Would be fun for the long weekend!
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    I talked to a guy on 20 this morning who got an advanced copy Thursday night. (Probably one of the black box testers) He didn't say anything about what was updated because he had to leave for a meeting and the QSO only lasted two minutes...... I have the day off and a long weekend and would love to play with a new update! (If it passes muster)
  • k0eoo
    k0eoo Member ✭✭
    edited June 2020
    Thanks for the update Ken, I too have a long weekend and really wanted to play with the new version and GET ON AM!! I found a 23" monitor that wasn't doing anything useful so I replaced the 20"er as my 6000 display, WOW very nice!! Ciao, Dennis, k0eoo
  • Sergey R5AU
    Sergey R5AU Member ✭✭
    edited January 2020
    Very appreciate to start testing new one on my iMac27 :-) Have a nice weekend guys!
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    Are you doing dual monitors yet? That is when it really gets neat! I currently have a 22" and a 19" and will be replacing the 19" with a duplicate of the 22 so I can have common setups. But I will need a new video card to run both on HDMI. My current computer card has one HDMI & one VGA.
  • W5XZ - dan
    W5XZ - dan Member ✭✭
    edited December 2016
    thanks for the update, Eric...
  • k0eoo
    k0eoo Member ✭✭
    edited March 2017
    Well, I'm bummed but certianally understand... Thanks for the update Eric Dennis, k0eoo
  • k0eoo
    k0eoo Member ✭✭
    edited December 2016
    I have two monitors also, a 22" and the new 23" Samsung SM2333, it has truly great color and contrast. Think I might replace the 22"er with one...
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    That's bad news and good news. But I guess I will be able to work on my antennas this weekend instead of playing with the new software....
  • W4EG
    W4EG Member ✭✭
    edited August 2013
    I was expecting today...it will be a very long weekend George... 73 W4EG
  • Al_NN4ZZ
    Al_NN4ZZ Member ✭✭✭
    edited March 2017
    I hope there is a fix for the CW Keyer bug in the release. Any QSO longer than a minute is likely to include a missed DIT or two. Sounds like it may be a 1-2 weeks before the beta group (i.e. preview group) gets the update. Alpha next week --> BlackBox group --> Beta group Regards, Al / NN4ZZ
  • Gerald-K5SDR
    Gerald-K5SDR FlexRadio Employee ✭✭
    edited April 2019
    Note that development never stops while a version is in the QA process. The next iteration wraps up Monday. It is happening in parallel. We may be in gray box test on the next release before you get the last one.
  • Steve-N5AC
    Steve-N5AC Community Manager admin
    edited December 2016
    Al, we worked on QSK CW this week and found the source of the problem you are describing. We were periodically gathering detailed telemetry on the power supplies (about 20-30 parameters) which could stall the keyer when we did it. We've remanded this code to just the factory testing branch as it was primarily there for factory test: the radio measures its own voltages, currents, fan speeds, etc and tells us if it is working correctly. We cannot seem to make the keyed stall like this any more. We are planning to work this code into 0.15.x, but we don't have a lot of hours on the code. If we have issues in testing we may pull it, but either way it is coming down the pike in the near future.
  • Dave - WB5NHL
    Dave - WB5NHL Member ✭✭
    edited December 2014
    3 monitors here a blessing. Internet, Dxspots: Smartsdr: fldigi & propagation. Great for old eyes.
  • Al_NN4ZZ
    Al_NN4ZZ Member ✭✭✭
    edited December 2016
    Steve, Good news, that sounds like what we we hypothising. It felt like a higher priority process interrupting the keyer code. Will be great to get this one fixed! Regards, Al
  • DonS
    DonS Member ✭✭✭
    edited August 2013
    Sergey I love running SmartSDR on my iMAC 27. I am using Parallels 8 with Win Pro 7 and a Navigator for the digital stuff. And like you I can't wait to start testing a new one :-) Don - kx9q
  • k0eoo
    k0eoo Member ✭✭
    edited December 2016
    Dave, what hardware/software do you need to get 3 monitors going?
  • Al_NN4ZZ
    Al_NN4ZZ Member ✭✭✭
    edited December 2016
    I replaced my stock video card with one that supports up to 4 monitors. I'm currently using three monitors ( 22 inch, 27 inch, 22 inch ). Let me know if you would like to see some pictures and video card details. email al@nn4zz.com Regards, Al / NN4ZZ
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    Perhaps start a new thread with pics and info. Which card & how much?
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    So, Steve, Now are you going to sample power supplies one at a time in sequence instead of all at once?
  • Al_NN4ZZ
    Al_NN4ZZ Member ✭✭✭
    edited December 2016
    Ken, I have the video card info, pictures, and prices posted in my NN4ZZ shack album in another forum. Email me if you would like a link. al@nn4zz.com Regards, Al / NN4ZZ
  • k0eoo
    k0eoo Member ✭✭
    edited December 2016
    Al, could not fine the video card you're using on your web page. can you just send me the video card make and model? Dennis,k0eoo
  • Al_NN4ZZ
    Al_NN4ZZ Member ✭✭✭
    edited December 2016
    Ok, just sent you the links to your k0eeo@arrl.net email address. Regards, Al

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.