Is CWX availale on front panel of M series

  • 1
  • Question
  • Updated 4 months ago
I have not been able to find CWX panel access on front panel my 6400M.  If running from computer it is an obvious selection at bottom of display.  I have searched the online manuals but have found no way to access it, if it is even available.  
 
Photo of Ron WD5FUN

Ron WD5FUN

  • 26 Posts
  • 6 Reply Likes

Posted 4 months ago

  • 1
Photo of Neil D Friedman N3DF

Neil D Friedman N3DF

  • 106 Posts
  • 27 Reply Likes
The F1 to F6 buttons on the front of the M models represent the only CWX available when using the radio (rather than a PC) as the client.  Each button may be programmed as a CW memory.  
(Edited)
Photo of Wayne

Wayne

  • 614 Posts
  • 84 Reply Likes
CWX shows uo on the 6400M Phone/CW menu tab in the section labled CW below the microphone section.

Page 59 of Flex6400M / Flex6600M user guide version 2.1.30 dated 29 January 2018.
Photo of Ron WD5FUN

Ron WD5FUN

  • 26 Posts
  • 6 Reply Likes
Thank you for your replies .  I had found the individual memories but was hoping for  a CWX panel like on PSDR or the computer version of SmartSDR.  I will just use K9DUR's Morsekeyer6k memories for DX