Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Installing remote SDR on a Maestro, remotely.

Jack
Jack Member ✭✭
edited February 2018 in FLEX-6000 Signature Series
My cable modem was reset by the cable company on a service call. Since then my remote Maestro (500 miles away) will not log in and shows UDP failures among other things. Trying to reinstall remote smart SDR with no luck? Worked great for months before that. 6300 and Maestro, Rev 2.1.32 

Comments

  • Bob K8RC
    Bob K8RC Member ✭✭✭
    edited February 2018
    You need to have ports 4993 and 4994 open for UDP in your router(modem) to make Smartlink work.  If the reset closed those ports then that's your problem.

    Fix will depend on the router make & model.
    The cable company might help.

    Good luck.
  • Mike va3mw
    Mike va3mw Member ✭✭
    edited February 2018
    Too late now, but for the future always leave a PC running Teamviewer so you can log on remotely to then be able to log into your router to make changes. Mike
  • Bill  /  VA3QB
    Bill / VA3QB Member ✭✭
    edited February 2018
    Do you have remote access to your router? If so just login. Find the iP address of your flex which most likely changed. Then redo the port forwarding. 73 Bill VA3QB
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited February 2018
    Jack, as has been mentioned above, if your ISP changed/reset your router, then I suspect that the port forwarding configuration, either manually of by UPnP will need to be reconfigured.  If you were using uPnP and this is on by default in the router, then rebooting the radio should dynamically open the ports.  There is also the possibility that there is an IP issue if your radio was using a statically assigned IP address.  The key takeaway here is that you are going to need access to the radio and it's network either physically or remotely.
  • Jack
    Jack Member ✭✭
    edited February 2018
    I am on the radio end with modem and router, the Maestro is 500 miles away. I will check out those ports, however the router was not reset (reboot yes)  only the modem which has been bridged to the router. My IP did change, how do I tell remote SDR or reinstall remote SDR on the Maestro? The IP once set is continuously renewed. Never had it change before. Is  that maybe not necessary at the Maestro end? My iPhone works perfectly remotely, different app maybe same ports? But did need to up date the IP.  The sad part is this remote system has worked great since the 2.0 came out. Can't say enough about it! It has enabled a good friend with disabilities, a life long amateur,  under very difficult circumstances to return to Amateur Radio. I have tried other arrangements but none have demonstrated the reliability and ease of use as remote SDR.  At least until the cable company decided to help!  Which turned out to be completely unnecessary!! Thanks for all the inputs,,,will follow up.
  • Mike va3mw
    Mike va3mw Member ✭✭
    edited February 2018
    Hi Jack

    If I understand what you are saying, it sounds like the Maestro is the only device having issues connecting, correct?   

    The way it works is that that Maestro will check with our servers to see what the your external IP address is and which ports.  Then, the Maestro does the connection to the radio.    If rebooting the Maestro has not solved the issue, then maybe it is logged out of SmartLink or possibly the firewall at the Maestro end is blocking outbound connections somehow.

    Since your iPhone works remotely, we can eliminate the Radio end as being part of the problem, at least for now.

    Mike

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.