Install of SSDR 1.9.9 failed

  • 1
  • Problem
  • Updated 3 years ago
  • Solved
Windows 10 64 bit has been running SmartSDR in the past.  I uninstalled SmartSDR and then installed SmartSDR 1.9.9, radio chooser said to upgrade to I clicked the upgrade button and the yellow progress bar made it slowly to the right and sat there for fifteen minutes all the way to the right.  I closed the radio chooser and restarted SmartSDR v1.9.9 but the radio is no longer in the radio chooser.  Front panel of radio was looking normal - blue light and my call sign displayed on the front panel.  I shut down and restarted the radio and now radio shows up in SSDR chooser but when I connect to the radio, there is no waterfall or pan adapter but the SSDR user interface was responding and I could change frequency.  SmartSDR 1.9.7 was working fine before this.
Photo of Larry da Ponte

Larry da Ponte

  • 159 Posts
  • 15 Reply Likes

Posted 3 years ago

  • 1
Photo of Neal - K3NC

Neal - K3NC, Elmer

  • 562 Posts
  • 191 Reply Likes
Official Response
I would power it down then remove power to the radio for 10 seconds or so, then try to start it up before I would try the reset mentioned above.