This is HOT off the press.
Rob has been busy measuring the IC-7300 and IC-7851.
He has both radios on the bench right now.
... further read here:
.... On the 7300, the data looks kind of OK, about like the 7410 or 7600, but there is a catch.
With the older radios, turning on the IP+ improves the BDR3 significantly.
With the 7300 it “looks like” it does but there is still a problem with overload.
Specifically, Rob writes:
Blocking measurement was limited by the ADC overload indicator “OVF”
Overload with a single signal occurs at -10 dBm
While dynamic range is increased significantly with IP+ enabled, the overload
point remains -10 dBm.
73 Chris DL5NAM