I can't hear my voice in monitor or playback my voice? after record

  • 1
  • Question
  • Updated 2 years ago
After recording my voice I can't hear anything,,It used to work....
Photo of Bill -VA3WTB

Bill -VA3WTB

  • 3849 Posts
  • 929 Reply Likes

Posted 2 years ago

  • 1
Photo of David Decoons wo2x

David Decoons wo2x, Elmer

  • 1402 Posts
  • 306 Reply Likes
Hi Bill

Weird. The record/playback feature works fine here. Also monitor function works fine.I typically set master volume to about 1/4 the way up and slice volume to 65. At that setting monitor level has plenty of volume around 90 with my headphones.

Try reloading one of you profiles and test again. If that doesn't work try cold booting the radio. Shut down, remove power for 30 second and reboot.

Curious what you find.

Dave wo2x
Photo of Norm - W7CK

Norm - W7CK

  • 757 Posts
  • 163 Reply Likes
I have had this happen after a software update.  One thing I have learned is to always export my profiles prior to software upgrade.  I perform a factory reset and then install the new software.  I then then import my profiles (except preferences).  Sometimes I even reset back to factory right after the software install then import my profiles.  This usually takes care of nearly all of the strange behaviour I use to experience after an upgrade.