Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

How do I change Monitor Volume in CW Mode without changing overall Volume

Ken W9IE
Ken W9IE Member ✭✭
edited January 2020 in SmartSDR for Windows
I cannot find a slider or level adjustment for only the monitor level or volume Or am I missing something Ken W9IE

Answers

  • Jim K4JAF
    Jim K4JAF Member ✭✭
    edited January 2018
    There is no adjustment at this time.. Jim K4JAF
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Jim is right. We have not implemented that feature in SmartSDR yey.
  • W5XZ - dan
    W5XZ - dan Member ✭✭
    edited January 2020
    I have found a temporary work-around for lack of sidetone volume adjust on cw...IF you use speakers ( i know, heresy on cw...but i give Cindy QSK )...there are two audio volume controls...one in the top right corner of the GUI, 'master' i guess?...and another in the speaker drop down menu...seems the 'master' affects monitor volume, but the slice speaker does not...turn the 'master' down, and the slice audio up... still juggling AGC-t values... JM2C...73
  • DonS
    DonS Member ✭✭✭
    edited August 2013
    how are you adjusting AGC-T on the 6x00 radio?
  • W5XZ - dan
    W5XZ - dan Member ✭✭
    edited December 2016
    it's the bottom slider in the speaker drop down menu...default of 50 is usually too high, IMHO
  • DonS
    DonS Member ✭✭✭
    edited August 2013
    I assume you are referring to the slice speaker not the general speaker in the upper right corner of the screen.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.