Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

How to play pre-recorded messages with a Flex 6300

Stewart Rolfe
Stewart Rolfe Member
edited January 2017 in SmartSDR for Windows
I'm trying to use the F-key messages in N1MM to send a pre-recorded 'CQ' in ssb. I normally operate cw so I'm not familiar with this speaky stuff, but I do have a message recorded manually in the correct place and it plays ok through the line-out of the pc.

I've connected this to pin 1 of the rear Acc connector but my problem is getting this audio to drive the radio (ptt is fine). As I understand the manual I should be able to turn on +ACC in the Transmit Control Panel while having the primary audio source set to MIC - this way I can press F1 to voice my CQ message via Line In of the Accessory socket and then reply with the mike but it doesn't work. If I set the primary audio source to ACC it works fine but that's pretty useless.

Maybe I've missed something simple..?

73,
Stewart, GW0ETF

Answers

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.