Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

How to enable PTT and disable QSK (N1MM+ / external winkeyer / 6600M)

Andy - KU7T
Andy - KU7T Member ✭✭
edited September 2018 in FLEX-6000 Signature Series
I used CW delay long enough to get a semi break in QSK. Now, I am playing with new amp, and I would really just like to not use any QSK. I am struggling to setup the PTT to my liking. 

I would like to disable QSK on the 6600M and toggle PTT appropriately. I would like to get a 15 ms delay (as this is good for amplifier) and a very small tail time as well. If I would use the radio CW delay, its either too short so its still semi-breakin or too long, so I loose some receive time at the end of transmission.

How have others set this up correctly? Something in N1MM or in Winkeyer?

Thanks,
Andy
KU7T

Answers

  • Andy - KU7T
    Andy - KU7T Member ✭✭
    edited September 2018
    Disregard this. The cable that I thought I had was not connected. Once I connected Winkeyer PTT with PTT on teh rig, all worked.  Embarrassing...

    73
    Andy
    kU7T

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.