How exactly does remote mode work? Does it have audio?

  • 1
  • Question
  • Updated 1 year ago
  • Answered
From what I understand, one can run SmartSDR for iOS in "remote" mode where SmartSDR is running on a PC and you can still connect to the radio with SmartSDR for iOS but it doesn't show the panadapter.

Are you still able to hear audio from the radio and transmit with SmartSDR for iOS in that case? Or is it simply a means of controlling the radio like CAT and you have to setup your own audio for remoting?
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2278 Posts
  • 919 Reply Likes

Posted 3 years ago

  • 1
Photo of Marcus - DL8MRE

Marcus - DL8MRE

  • 150 Posts
  • 40 Reply Likes
Official Response
Hi Ria,

thanks for your very good question.

Due to it's nature and amount of data, Audio, FFT and Waterfall can not be sent from the Radio to more than one device and this is, why the iOS App can not show the waterfall and also can not hear the audio when in remote-mode.

The App can only send/receive "control messages" to/from the radio to change/tune the frequency, change modes, control DAX/DAXIQ etc. in remote mode.

So your comparison with CAT is quite right.

vy 73,
Marcus, DL8MRE
Photo of Ed W2MKM

Ed W2MKM

  • 39 Posts
  • 1 Reply Like
Thanks Marcus ...  Glad I found this .. I'm 2 weeks into my 6400 and decided to go for SmartSDR ... and am still struggling with SmartLink (that's a different thread) but I am able to get SmartSDR working on the Wifi LAN that is connected to the 6400.  

I was also puzzled by the Remote Mode option and was trying to get the Panadapter going in remote for for a couple of hours until I turned to the community.

It might be worth mentioning your description above in the next version of the SmartSDR documentation as the string "remote mode" does't seem to appear.

That said, can you elaborate on the utility of this mode? 

Thanks

Ed W2MKM