How do I set-up Behringer UltraVoice XM8500 Dynamic Microphone to work with a 6600 and save a new mic profile for it?

  • 1
  • Question
  • Updated 1 week ago
Mic Setup?
Photo of Robert Gross

Robert Gross

  • 2 Posts
  • 0 Reply Likes

Posted 1 week ago

  • 1
Photo of Bill Roberts

Bill Roberts

  • 222 Posts
  • 40 Reply Likes
Physically, obtain the proper XLR to 3 ring 1/4 inch male plug adapter from Flex and plug in the mic.  I have found that the PR781 mic profile is a good place to start.  You'll need to use the 20 DB preamp and turn the level up to 70 or so.  I mainly use the PR781 but have substituted the Behringer UltraVoice with little if any difference noted.