How do I connect a Winkeyer to the rear of my flex 6500

  • 1
  • Question
  • Updated 3 years ago
  • Answered
I would like the connect my winkeyer to rear jack. Manual says, "fsk/cw (pin 4) ?  Setting the Winkeyer up to the rear will let me use 2 differnet paddles with having to unplug them from the front connector. 

Don..w2xb
Photo of Don

Don

  • 100 Posts
  • 5 Reply Likes

Posted 3 years ago

  • 1
Photo of Barry N1EU

Barry N1EU

  • 495 Posts
  • 123 Reply Likes
Official Response
The hardware manual says you key via grounding pin 4.  So DB15 pin 4 goes to center conductor and one of the ground pins (e.g. DB15-5) goes to shield of the cable connected to the hardware WinKeyer.

I won't bother quoting the rest of the info in the manual, but it sounds like that's all you have to do because that input is always active.

Barry N1EU