How do I change my SmartLink account password?

  • 1
  • Question
  • Updated 2 years ago
  • Answered
I cannot find a link or button to allow me to change my SmartLink password.  What am I missing?
Photo of Mark WS7M

Mark WS7M

  • 505 Posts
  • 152 Reply Likes

Posted 2 years ago

  • 1
Photo of Steve K9ZW

Steve K9ZW, Elmer

  • 1553 Posts
  • 768 Reply Likes
Official Response
Lost password routine?

Think that might work.

73

Steve
K9ZW
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9186 Posts
  • 3550 Reply Likes
That is the answer.
Photo of Michael - N5TGL

Michael - N5TGL

  • 308 Posts
  • 101 Reply Likes
I wish it had a guest login that could be activated so you could share the radio if you wanted.
Photo of Mark WS7M

Mark WS7M

  • 505 Posts
  • 152 Reply Likes
Agreed on the guest login.  Maybe in the future.

I posted it would be nice to have an "admin" regular login where you can do anything and a guest login where you could control a few things.  I mean for starters as a guest login I'd like to:

1) Limit bands the guest can operate
2) Limit max power
3) Disallow any setup changes (network etc)

That would make it nice and more secure for guest use.
Photo of Michael Aust

Michael Aust

  • 135 Posts
  • 32 Reply Likes
Yes, I agree after playing with V2.0 for a while an letting my friend test drive v2.0 with my station, he manage to unregister it and had to fix things.

mike

See Kenwood & Icom have both Client & Server of their software where V2.0 can
be dangerous in the hands of a guest by messing up the setup to the radio !
Photo of Michael Aust

Michael Aust

  • 135 Posts
  • 32 Reply Likes
Also, notice that a sequence in resetting had to done to restore 
SmartLink
1. Router only on, forward TCP & UDP ports on Router
2.) Next with UPnP enable on Router 
3.) Turn on Flex6xxx connected to PC thru Ethernet 
4.) Register Radio with PTT
5.) Enable Smartlink UPNP ports
6.) Make sure Green Light on Smartlink under TEST is green 
     for both Automatic UPnP ports & Manual Forward Ports
7.) Test V2.0.17 with LAN & WAN(outside)
8.) Good to go !!!

9.) If a guest login later, things get messed up since the guest can Unregister the
     Flex6xxx and since he has no access to PTT register, system fails 
10.) Repeat sequence above starting with everything off except router !!!
     Begin process steps  from above !!