HI there .... Anyone could help me to setup DM780 with FLEX 6300 running SSDR that allows me working CW

  • 1
  • Question
  • Updated 2 years ago
Setup DM780 with FLEX 6300 running SSDR in order to work CW . I tried to do it but without success 
Photo of Jose Luis Roca

Jose Luis Roca

  • 13 Posts
  • 0 Reply Likes
  • confused

Posted 2 years ago

  • 1
Photo of Ernest - W4EG

Ernest - W4EG

  • 215 Posts
  • 39 Reply Likes
Jose Luis,
I will send you a complit said instruction for HRD setup with photos; to your email address if you have in QRZ.COM.
ReHowcuerdo y habrasos colega.
Photo of Jose Luis Roca

Jose Luis Roca

  • 13 Posts
  • 0 Reply Likes
Thank you Tim . So if I try to connect third party equipment like HRD or DM780 I must define which would be the third part equipment. If you have FLEX as a mainframe,  so HDR and DM780 would be third equipment therefor I  must select port 4 in order to open HDR and DM780 and whats up with port 104 ?, Where can I find it ?
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9153 Posts
  • 3502 Reply Likes
The low number port is shown for the individual CAT port in the CAT application window if one was created that uses a com port.  There are CAT ports that use a TCP connection.
Photo of Jose Luis Roca

Jose Luis Roca

  • 13 Posts
  • 0 Reply Likes
TIm I toure doing . I read your WSJT-X setup woth Smart SDR . I do not understand why you put one COM 4 for CAT control and COM 11 for PTT . I must opened two new COMs ?
Photo of Jose Luis Roca

Jose Luis Roca

  • 13 Posts
  • 0 Reply Likes
Sorry I must open two new COMs  ?
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9153 Posts
  • 3502 Reply Likes
If the digital mode program will operate PTT using the CAT (com4) connection, then the PTT (com11) is not required.
Photo of Jose Luis Roca

Jose Luis Roca

  • 13 Posts
  • 0 Reply Likes
Ernest thanks a lot !!!. I guess I put my e-mail in QRZ . If not e-mail is lu3vcv@gmail.com.

73 my friend
LU3VC 
Photo of Jose Luis Roca

Jose Luis Roca

  • 13 Posts
  • 0 Reply Likes
Yes Rory but it works with digital PSK and so on via DAX but not CW. Thanks again for your pretty soon answer.

73 
LU3VC
Photo of Rory - N6OIL

Rory - N6OIL

  • 299 Posts
  • 55 Reply Likes
No problem Jose, sorry I'm not a CW op yet that's next on my list to learn. I'm sure Chris K6OZY will chime in soon.
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 956 Posts
  • 177 Reply Likes
Jose, set up a dedicated Winkey port in SmartSDR CAT and connect the DM780 Winkeyer to it.
That works great for me.
73, Alex - DH2ID
Photo of Norm - W7CK

Norm - W7CK

  • 747 Posts
  • 154 Reply Likes
I've had great luck with HRD using all of the included digital modes - except CW.  HRD just doesn't seem to decode cw very well for me.   PSK, Olivia and all of the others work great though.   I originally started out using MiniDeluxe for the CAT interface and eventually migrated over to DDUtil which emulates the HRD core program.  No matter what I did, I was never very successful at running CW.  The decode was always pretty poor.  cwSkimmer seems to do a much better job.
Photo of Norm - W7CK

Norm - W7CK

  • 747 Posts
  • 154 Reply Likes
Geez, I just tried HRD on CW again and now it seems to be decoding a little bit better than I remembered. 

Decoding seems to be extremely dependent on how you set the squelch level in DM780.  If too low, lots of garbage.  It doesn't do well on weak signals, but the better signals seem to decode fairly well.

Winkeyer is a nice feature.....   I forgot HRD had that.
(Edited)