Hi, I cannot connect Maestro to my network via wifi as it won't accept the password . If I disable security on the router everything works .

  • 2
  • Problem
  • Updated 3 years ago
  • Solved
Hi, I cannot connect Maestro to my network via wifi as it won't accept the password that I have assigned to the router. If I disable security it works just fine. Is the Maestro only set for a specific security protocol? All my other devices connect using this pw and have done so for quite awhile.

Thanks,

Michael Evans
K7URA
Photo of M Evans

M Evans

  • 20 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 2
Photo of John  - W8AGS

John - W8AGS

  • 48 Posts
  • 13 Reply Likes
Official Response
Hi Michael,

I had the same problem with the Maestro. I was using WEP security also. All my other devices connected with no problems. I talked to Dudley at FRS and he said that Maestro will not connect with WEP security. I was able to change my older Linksys router to WPA security and bingo, the Maestro connected and runs fine even with two slices and panadaptors. I'll probably upgrade my router in the near future, but for now , the Maestro is running fine. Of course, I had to change all my other devices with the new password for WPA.
Thanks Dudley for your help and good luck Michael.

John, W8AGS