Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

here comes FT4 - JT contest digital mode

ctate243
ctate243 Member ✭✭
edited November 2019 in Contesting
====== Forwarded Message ======

Date: 4/22/19 11:34 AM
Received: 4/22/19 11:37 AM -0400
From: joe@princeton.edu (Joe Taylor)
To: wsjt-devel@lists.sourceforge.net (WSJT software development)

To:   WSJT-X users interested in testing FT4
From: K1JT, K9AN, and G4WJS

Soon after the "FT8 Roundup" held on December 1-2, 2018, we
started serious work on a faster, more contest-friendly digital
mode that can compete with RTTY-contesting QSO rates while
preserving many of the benefits of FT8.  The result is FT4 -- a
new digital mode specifically designed for radio contesting.

Over the past month a small group of volunteers have been
conducting on-the-air tests of FT4.  The early tests were very
successful and helped us to make a number of important design
decisions.  We believe FT4 has considerable promise for its
intended purpose.

We'll soon be ready for testing by a larger group.  If you might
be interested in participating and offering your considered
feedback, please read the descriptive document "The FT4 Protocol
for Digital Contesting", posted here:
http://physics.princeton.edu/pulsar/k1jt/FT4_Protocol.pdf

We plan to post downloadable installation packages for WSJT-X
2.1.0-rc5 on April 29, one week from today.  The document linked
above includes

  - Instructions for installing WSJT-X 2.1.0-rc5 and FT4 configuration

  - Operating instructions for FT4

  - Basic description of the FT4 protocol, modulation, and waveform

  - Detailed sensitivity measurements for FT4 under a wide
variety of
    simulated propagation conditions

  - Schedule for upcoming test sessions

Please consider helping us to make FT4 a successful mode for
digital contesting

With best wishes and 73,

     -- Joe (K1JT), Steve (K9AN), and Bill (G4WJS)



_______________________________________________

Comments

  • Steve K9ZW
    Steve K9ZW Member ✭✭✭
    edited April 2019
    Very interesting mock-contest testing - sounds like fun!

    73

    Steve
    K9ZW

    http://k9zw.wordpress.com

  • ctate243
    ctate243 Member ✭✭
    edited April 2019
    Well in any case it should work effectively with the flex ecosystem.
  • John - K3MA
    John - K3MA Member ✭✭
    edited November 2019
    I wonder how they will prove that the operator is actually at the radio and computer making the contacts.  I know several people that are using automated systems to work FT8 contacts with no physical presence.

  • Pat N6PAT
    Pat N6PAT Member ✭✭
    edited April 2019
    How do you know if a Flex op is really in NE when they could be operating remotely from FL?
  • Joe N3HEE
    Joe N3HEE Member ✭✭
    edited April 2019
    It doesnt matter where the OP is located.
  • Ria
    Ria Member ✭✭✭
    edited April 2019
    Same way you prove that people aren’t using excess power or breaking other rules.
  • Steve K9ZW
    Steve K9ZW Member ✭✭✭
    edited April 2019
    The usual concerns of contestant propriety in meeting a contest's rules are a valid reflection on the variable interpretations and variances in personal ethics that face all contests. 

    Advances in technology perhaps bring forward new nuances to consider while the core basis of a competition - that contestants trust each other enough to consider relative scores accurate - remains unchanged.

    The mock-contests testing FT4 may bring out some new deep concerns, as otherwise there is little novel about FT4 different than many other forms of contesting.

    The FT8 QSO, as mentioned, is fairly automated and most certainly hams have experimented with fully unattended QSO automation. 

    Whether such automation is flirting with our rules we operate under, and our custom that we communicate with people via technology is challenged by such experiments.  

    There well could be an argument that my running an instance of WSJT-X on FT8 while typing this community post is more hands-off than some of us might draw the line.

    In a competition where the ultimate prize is personal honor it would seem a discord to one's own personal honor to cheat to take a higher spot.  YMMV as this is well into areas where people's opinions and actual actions do vary.

    ---

    Back to the FT4 experiment, the scheduled mock-contests sound like a fun way to field test a new mode.  Hope many of us have a chance to participate!

    73

    Steve
    K9ZW

    http://k9zw.wordpress.com

    FT4 Thread https://k9zw.wordpress.com/category/ft4/  (more info in comments)

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.