I have my flex 6500 setup to run digital modes fb. Been trying to get JT65 to transmit and no luck. I can get JT65 to work on my ft5k but I am not setting something right in transmit (dax) with my flex..
Is the DAX button illuminated in the P/CW pane?
Is your PTT working?
Is the TX button illuminated in the DAX control panel (corresponding to the DAX channel in use)?
Are the devices selected in your application the correct DAX TX channels - not the "Reserved" ones?
Let's start there...
73, w5xz, dan
Now I have had sometime to play. I installed (Omni-rig ) had to go find it in the C:\ so that messed me up for one of the Jt-65 programs. You set it up for Kenwood TS-2000. I guess it runs in the back ground. Then whom ever mentioned setting up (Virtual-port) this helped another jt65 program going so one more for another day and I will have 3 programs of Jt-65 going Not all at once of course. LoL
See picture of added virtual ports add them and try using those for your jt-65 program you are using. DAX-RX-1 and DAX-TX-1 all set.
These were 3 different authored programs I tried. None would transmit before.
Thanks everyone`s comments for giving me ideas to look into it.
I hope this helps someone. 73 Jeff