Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

heil Proset ic + AD-1-Y

Steve - M3SXA
Steve - M3SXA Member
edited December 2017 in FLEX-6000 Signature Series
Got the above 2 items the headset was used with my old Icom 7600 and I just bought the AD-1-Y adapter for the flex 6500 but cannot get audio out of it, do I need to change the microphone insert for a non icom one or do I need a complete new headset? or is there a setting I have missed somewhere?
BIAS is off
+20db is on
Mic Gain up at 100
Getting the TX light ok....

Answers

  • K1UO Larry
    K1UO Larry Member ✭✭✭
    edited December 2017

    Hi Steve,


    If memory serves me correctly the Heil Ic was intended for use normally with Icom Radios and does require Bias to be on for the condenser element.  You should be ok after turning BIAS on for it....  I know I have seen others using that combo.


    regards,

    Larry  K1UO

  • Steve - M3SXA
    Steve - M3SXA Member
    edited February 2015
    Hi Larry, sure it tried it with bias off and on and zilch.... just fired it all up again and with bias on it's working.... thanks for the advice...

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.