have a question about flex sdr screen

  • 1
  • Question
  • Updated 3 months ago
On my flex screen it shows the station as "desktop" How do I get my call sign on the Station title? Its the same way on cat and dx screen, not showing radio name.

Don...w2xb
Photo of Don

Don

  • 109 Posts
  • 6 Reply Likes

Posted 3 months ago

  • 1
Photo of Larry - W8LLL

Larry - W8LLL

  • 533 Posts
  • 116 Reply Likes
If your talking about on the bottom bar just click on it and it will turn blue to edit it.
Photo of Don

Don

  • 109 Posts
  • 6 Reply Likes
Hello Larry,
Do that, but its not doesn't stay..

Don..w2xb
Photo of Larry - W8LLL

Larry - W8LLL

  • 533 Posts
  • 116 Reply Likes
Which SmartSDR version are you running?
Photo of Don

Don

  • 109 Posts
  • 6 Reply Likes
Runnin 2.5.1.1
Photo of John - AI4FR

John - AI4FR

  • 273 Posts
  • 78 Reply Likes
In SSDR click on "settings" then "Radio setup" then "Radio. You'll see where to change it from there.
Photo of Don

Don

  • 109 Posts
  • 6 Reply Likes
where is ssdr located in flex?

Don..w2xb
Photo of Greg - N8GD

Greg - N8GD

  • 239 Posts
  • 88 Reply Likes
After typing your call sign in the box at the bottom of the SSDR screen. . . . . .

     STATION: N8GD

you MUST hit the ENTER key for it to be remembered next time you start up!

To set the call in CAT and DAX, follow AI4FR's instructions above, but again, be sure to hit ENTER at the end of entering the call sign.
(Edited)
Photo of Jim  KJ7S

Jim KJ7S

  • 193 Posts
  • 34 Reply Likes
You can also look for 'Settings' at the top of the flex display, click on 'Radio Setup', and look for 'Nickname', in the 'Radio Identification' area. Change it then close it after you hit enter, and it should retain the 'nickname' from then on.