Green Light Flashing on First Boot

  • 1
  • Question
  • Updated 3 years ago
I have seen this around the forums before, but this happens to me constantly. I shut off the radio for the night, and then the next evening. I tap the button.  It flashes forever. I hold it to shut it off, then tap it again, the second time it will boot up.  Is there a better procedure for this?
Photo of Andrew Holman

Andrew Holman

  • 67 Posts
  • 12 Reply Likes

Posted 3 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3478 Reply Likes
Official Response
The issue you reported is a confirmed software defect. This issue will be fixed in the next release of SmartSDR.

This issue a a timeout on initialization. To mitigate this issue, if after 2 minutes the power LED is still flashing green, indicating that the boot process is stalled, press and hold the power button to power down the radio. The press and release the power button as you would normally to power on the radio. The radio should power up normally. Once the radio boots normally, it if OK to use.