Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

GPSDO Function

Marv
Marv Member
edited April 2020 in SmartSDR for Windows
Pehaps I missed this in the release notes. With Ver. 1.0.5 GPSDO would lock and remain locked on shutdown going to solid amber indicating GPS powered for stability. With 1.0.24 I do not get the solid amber light and every time I reboot GPSDO goes through the warmup and lock cycle. Thanks Marv W0ZK

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    When SmartSDR is open, go into the Radio Setup-> GPS tab and make sure the GPSDO shows that it is installed. If not, try uninstalling it and re-installing it. Let me know if that worked.
  • Mike_N1MD
    Mike_N1MD Member ✭✭
    edited April 2020
    I have the same experience.. I will follow Tim's advice and report soon. Mike, N1MD
  • Mike_N1MD
    Mike_N1MD Member ✭✭
    edited April 2020
    I followed Tim's advice. The GPSDO WAS installed. I uninstalled and then re-installed. The GPSDO now works properly. Mike, N1MD
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Excellent! Thanks for the feedback. The GPSDO just needed to be reset after the software update.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.