FRLogger V0.1.0.9 is available

  • 1
  • Praise
  • Updated 6 months ago
Hi all,

V0.1.0.9 is available.

This version fixes an issue where imported QSOs were getting the display date/time set to the time of import.

If you have version 0.1.0.8 installed you should be able to simply run the updater from the help file.

Alternatively here is a link to an installer:

http://184.154.226.168/frinstallers/FRLoggerSetup-0.1.0.9.exe

If you choose to use the installer:

1) Uninstall your prior version using the Windows control panel, programs
2) You do not and should not manually delete any files or directories
3) Download the installer above and run it.

Mark
Photo of Mark - WS7M

Mark - WS7M

  • 1352 Posts
  • 503 Reply Likes

Posted 6 months ago

  • 1
Photo of Zack Schindler - N8FNR

Zack Schindler - N8FNR

  • 152 Posts
  • 27 Reply Likes
I have 0.1.0.7 installed on 2 PC's. When I click on Check For Updates it says Failed to Check for Updates in the lower right of the screen. 

Uninstalled the old version and ran the installer from your link and this error comes up. Also FRlogger does not start correctly.

Photo of Mark - WS7M

Mark - WS7M

  • 1351 Posts
  • 503 Reply Likes
Zack,

Please use control panel to uninstall.  Do not delete anything, just uninstall.  IE leave all your files and directories in place.

Download the installer for 1.0.9 and run it.

I forgot to mention that due to the rename the updater is only backward compatible with 1.0.8.  It won't work for 1.0.7
Photo of KC2QMA_John

KC2QMA_John

  • 784 Posts
  • 332 Reply Likes
This is awesome Mark. GREAT WORK!
Photo of WW1SS - Steve

WW1SS - Steve

  • 809 Posts
  • 269 Reply Likes
Hey Mark . . . Is there a way to take the KPA 1500 panel and have a connection via Ethernet by putting in an IP address like I do now with the elecraft utility??
Photo of Mark - WS7M

Mark - WS7M

  • 1351 Posts
  • 503 Reply Likes
Steve,

The KPA amp is interfaced via RS-232.  That being said if you have a TCP/IP to serial server, like:

https://www.amazon.com/USR-N520-Double-Ethernet-Multi-Host-Polling/dp/B07G56LBQJ/ref=sr_1_22?keywords=usb+serial+server&qid=1554856497&s=gateway&sr=8-22

or similar and it provides a TCP port to a serial port then you can connect to it using the following for the port:

tcp:<ip>:<port>

Where <ip> is the IP address of the serial device on your LAN.  <port> is the port number that maps to the port.  So something like:

tcp:192.168.168.34:8900

If your device was at address .34 and the port was 8900
Photo of Zack Schindler - N8FNR

Zack Schindler - N8FNR

  • 152 Posts
  • 27 Reply Likes
The uninstaller did not work. I ended up removed the WS&Mapps dir and then installed FRlogger and it works ok now.