FOR YOU FLEX 5 USERS: NEW UDC'S AND FREQUENCY LIST

UDC's and Memory File

I have uploaded new Mode specific UDC files for users of Flex 5K and PowerSDR.
CW, RTTY, PSK, JT65, JT9, RTTY, & SSB

Each file can be assigned to a specific Commander User-defined-Control.
Clicking on said buttons, will change your 5K to setting specifically for that mode.
All these settings can be user modified.
In fact you will probably have to change the SoundCard choices as these are for VAC pairs.

I have also uploaded a Memory Bank file. It has the usual frequency, mode, filter widths etc. for the mode selected.
It covers 160 though 6 and is easily modifiable. Just follow the DX Commander instructions.
This file can be selected in Commander. You can save your old file prior to adding this new one.

Basically, using the UDC and Memory Bank Files, gives you 2 mouse click change of Flex Frequency, mode, filter, power etc. settings.
AS I SAID, ALL SETTING ARE USER MODIFIABLE. In fact the VAC choices will probably be different as I use 4 sets of VAC's each customized for that mode. If you use a sound card, obviously you will have to modify it accordingly.

Hopefully Flex will have similar code available that will give 6K radios the same or similar single mouse click features.

If you have any questions, feel free to email me at bill@w9ol.com