Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

FlexRadio 6300 XVTR power increase greater 15 dBm

DL7MST
DL7MST Member
Hello Om´s

does someone know to increase the XVTR Power out greater than 15dBm limit?
For an Transverter operation i need at least 20-30 dBm.
Otherwise i have to use the 2nd Antenna out....

any ideas?

vy73, DL7MST,Matthias

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited July 2019
    Hi Matthias

    The maximum RF out of the XVTR port is actually 10dbm and there is no way to increase it inside the radio.  

    Which transverter are you using?

    73, Mike 
  • DL7MST
    DL7MST Member
    edited June 2020
    Hi Michael,

    thank you, i might have known it.
    I use the Ukraine Transverter from Transverter Store, for 144 MHz

    73, Matthias
  • Ken Hansen
    Ken Hansen Member ✭✭
    edited July 2019
    The Ukraine Transverters used to only ship with attenuators, he now offers them assembled without attenuators boards as well as with them. For example, here is the pre-built, ready-to-use 2m transverter without attenuator on eBay: https://www.ebay.com/itm/144-to-28-MHz-ASSEMBLED-TRANSVERTER-WITHOUT-ATTENUATOR-2m-144mhz-146mhz-VHF-UHF-/222662833996 He also used to provide instruction on request in how to bypass the attenuators. Hope this helps
  • George KF2T
    George KF2T Member ✭✭✭
    edited July 2019
    Agree - i used one for a while without an attenuator. The Flex handled it well. 
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited July 2019
    I have one without the attenuator, but only drive it with about 10% of the transverter port available power. You don’t want to run the transverter at full output anyway, reports are that they start to get dirty at more than about two Watts output.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.