Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

flexcontrol chrashes smart sdr

Getting this error, and smartsdr loks up .If i unplug flexconrol all is ok but no flexcontrol of course

Comments

  • Mack
    Mack Member ✭✭✭
    edited March 2019
    Geir,

    I'd make two suggestions:
    1. Load SmartSDR 2.4.9 on a different computer and test the FlexKnob there. If it works you know there is an issue with the original computer's USB port, software, or USB port.

    2. Try the FlexKnob on the original computer where it is not working using a different USB port.

    The FlexKnob is a very mature piece of software and unlikely to cause this error.

    Please let us know the results.

    73,

    Mack
    W4AX
    Alpha Team
  • Bob- W5TX
    Bob- W5TX Member ✭✭
    edited March 2019
    The most likely cause is a USB port conflict. Mack’s #2 suggestion addresses this.
  • Geir Ø Eriksen
    edited March 2019
    have tried it direct but no luck tried it on the backup computer  no luck there either
    will try i complete reinstall to se

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.