flexcontrol chrashes smart sdr

  • 1
  • Problem
  • Updated 4 weeks ago
  • (Edited)
Getting this error, and smartsdr loks up .If i unplug flexconrol all is ok but no flexcontrol of course
Photo of Geir Ø Eriksen

Geir Ø Eriksen

  • 2 Posts
  • 0 Reply Likes

Posted 4 weeks ago

  • 1
Photo of Mack McCormick

Mack McCormick, Elmer

  • 424 Posts
  • 147 Reply Likes
Geir,

I'd make two suggestions:
1. Load SmartSDR 2.4.9 on a different computer and test the FlexKnob there. If it works you know there is an issue with the original computer's USB port, software, or USB port.

2. Try the FlexKnob on the original computer where it is not working using a different USB port.

The FlexKnob is a very mature piece of software and unlikely to cause this error.

Please let us know the results.

73,

Mack
W4AX
Alpha Team
Photo of Bob- W5TX

Bob- W5TX

  • 109 Posts
  • 21 Reply Likes
The most likely cause is a USB port conflict. Mack’s #2 suggestion addresses this.
Photo of Geir Ø Eriksen

Geir Ø Eriksen

  • 2 Posts
  • 0 Reply Likes
have tried it direct but no luck tried it on the backup computer  no luck there either
will try i complete reinstall to se