flex6500 eq doesnt work on 3.1.8

  • 1
  • Problem
  • Updated 2 months ago
Upgraded flex 6500 to 3.1.8 and when using multi flex the EQ's do not function if more than 1 radio is connected via multi flex.
Photo of Robert Brooks

Robert Brooks

  • 2 Posts
  • 0 Reply Likes

Posted 2 months ago

  • 1
Photo of Lasse Moell

Lasse Moell

  • 186 Posts
  • 32 Reply Likes
Only guessing... There is an confirmed issue with the receiver EQ using more than one slice, could it be the same thing you see? Try to change mode i.e. go from LSB->CW->LSB and see if the EQ do kick in.
Photo of Eric - KE5DTO

Eric - KE5DTO, Official Rep

  • 951 Posts
  • 359 Reply Likes
This is what it sounds like to me too.  Please let us know if this suggestion helps Mr. Brooks.
Photo of WX7Y

WX7Y

  • 978 Posts
  • 221 Reply Likes
TX or RX not working? 
just checked here and at least with a windows slice up and a IOS slice up the RX EQ works on both devices here. 
I haven't tested the  TX EQ but have not noticed anyone complaining about my TX audio going wacko if I have someone connect in to the Radio. 
BUT I always do a hard reset anytime I do a firmware upgrade.
good luck 
73's
Bret
WX7Y