Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex v1.6.17.74 is now posted on the downloads page.

ka7gzr
ka7gzr Member ✭✭
edited May 2020 in SmartSDR for Windows

Jim

 ka7gzr

Comments

  • K5CG
    K5CG Member ✭✭
    edited October 2018
    Busy server. Too bad this isn't being distributed via torrent.
  • Kilroy
    Kilroy Member
    edited March 2017
    Nothing happening.  Must be overloaded.
  • KF4HR
    KF4HR Member ✭✭
    edited February 2017
    I'm getting an Internal Server Error.  No doubt their Server is pretty busy right now! :^D
  • Lewis Cheek
    Lewis Cheek Member ✭✭
    edited January 2018
    Loaded, running and so far NOTHING appears to be broken.:) Running Windows 7/64

    Lew
    N4CO
  • iz7auh
    iz7auh Member ✭✭
    edited January 2016
    very slow a FRS server
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    We are currently having some server resource contention issues.  Please be patient and if you experience an issue downloading, please wait a few minutes and try again.  Repeatedly trying to download over and over again will only exacerbate the problem.  Sorry for the inconvenience.
  • Ian1
    Ian1 Member ✭✭
    edited May 2020
    what a Mess Tim I downloaded 1.617 and now have a squeal from the DM780 when using digital modes couldn't figure it out and upon uninstall back to 1.5 now have DAX Driver whats the fix for this??

    Ian
  • dlwarnberg
    dlwarnberg Member ✭✭
    edited January 2016
  • Rob AB1NJ
    Rob AB1NJ Member
    edited January 2017
    running v1.617 and DM-780 working fine for me.
  • EA4GLI
    EA4GLI Member ✭✭✭
    edited November 2016
    I had a small hiccup on install. It told me the radio was not compatible. I clicked OK on the error message and click UPGRADE again and it worked.

    You can see the video of my upgrade here. I thought a bit too late to add the second camera so you don't get to see the beginning of the upgrade with the purple led and the Upgrading message on the LCD.



    https://www.youtube.com/watch?v=kvwk8z1mcCA

  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    1.6.17 up and running like a champ with all of the usual suite; DDUtil, HRDLog, DM780, HRD Rotator, SDR Bridge, CW Skimmer, FR Stacks & FR Meter.  It installed with nary a hiccup.
  • k3Tim
    k3Tim Member ✭✭✭
    edited December 2016
    I noticed with MON enabled, the XMIT digital tones are heard in the speaker.  That seems new to me.

    HtH.

    k3Tim
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    Not new.  Digital mode MON has been a feature for a while.
  • Ian1
    Ian1 Member ✭✭
    edited January 2016
    Mon is not the issue and I can't get the DAX drivers to uninstall on 1.617.

    getting Dax driver may not be properly installed error message

    Ianimage
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    I recommend opening a HelpDesk support ticket.
  • Burt Fisher
    Burt Fisher Member ✭✭
    edited August 2016
    I will try in February after bugs are found (no one is perfect)
  • Rob N4GA
    Rob N4GA Member ✭✭
    edited March 2017
    Is there a corresponding firmware update with this SW update this time? 

    Thanks,

    N4GA
  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    There is effectively a firmware update with every release of SSDR.  That's why initially it tells you the radio needs to be upgraded.
  • Rick Hadley - W0FG
    Rick Hadley - W0FG Member ✭✭
    edited January 2018
    There is effectively a firmware update with every release of SSDR.  That's why initially it tells you the radio needs to be upgraded.
  • Rob N4GA
    Rob N4GA Member ✭✭
    edited January 2016
    That's what I thought. The reason I asked is the radio did not do the usual purple light firmware update this time..

    Did yours?

    Usually SSDR stops you and says "Update Firmware"

    Thanks
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    There is a firmware release with every version of SmartSDR.  If you are running the 1.6.17 GUI with your radio and it isn't wanting to upgrade, then you have the proper firmware loaded.
  • Rob N4GA
    Rob N4GA Member ✭✭
    edited January 2016
    Thanks Tim. Radio is working fine. Sitting on the lazy boy listening to 40m right now via LAN.

    You guys are awesome!

    Rob
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    Cool.  I need to step away from the PC and go watch the game.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.