Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex Control and Dog Park SDR program for the Mac

David - KO1C
David - KO1C Member ✭✭
I can get my Flex Control to work with my Mac using Parallels but I can't get it to work using Dog Park SDR v.1.20b3.

Has anybody gotten their Flex Control to work on a Mac?

David, KO1C

Comments

  • Chris de Voogd
    Chris de Voogd Member ✭✭
    edited May 2020
    David,
    I'm using Bootcamp on MacMini (2018) and works perfectly with Flex Control.
    Chris
    DJ2NL
  • David - KO1C
    David - KO1C Member ✭✭
    edited May 2020
    Thank you, but I prefer to use the native Dog Park SDR program for the Mac.
  • David - KO1C
    David - KO1C Member ✭✭
    edited May 2020
    I was finally able to get it to work. 

    In the Dog Park SDR settings under FlexControl there is a drop-down menu that for me, had 3 choices. I thought I tried them all ....

    The one that worked was labeled /dev/cu.usbmodem143301. There was another similar choice but it had a different 6 character number, that one did NOT work.

    When you get it right, when you turn the FlexControl knob the little light next the "FlexControl" and the check box will light green.

    Note that box NEEDS to be checked.

    Thanks, hope this might help someone else.

    David KO1C

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.