Flex 6700 and HB9HQX

  • 1
  • Question
  • Updated 3 years ago
  • Answered
I have been using hb9hqx for jt65 for sometime now on my Icom ...I now have a 6700 and have it working but there is not enough audio to make the software decode... I have every control in 
sdr and windows  7 64 at max and it does not help.. any ideas??
tnx AH0U
Photo of AH0U


  • 47 Posts
  • 1 Reply Like

Posted 3 years ago

  • 1
Photo of Walt


  • 236 Posts
  • 74 Reply Likes
Official Response
Just for fun, I downloaded the program, loaded it into the Win 8.1, machine, set up the COM port for PTT, set the configure for DAX 1 RX and the TX Audio from Flex - it decodes and transmits without any level setting change at all.  I run the DAX levels at 50 as a default  I have a 6500 and using the latest .21 SDR software.  Always make sure your DAX is blue on the P/CW panel and that the proper DAX channel (the one you decided to use)  is set in the little frequency display in the panadapter for the DAX channel you are using , - and the corresponding DAX channels are selected in the DAX panel.  Oh - and the Bandwidth for DIGU is 3.0K.

Good luck !