Flex 6700 and have a Yaesu M100 desk microphone PTT not working

  • 1
  • Question
  • Updated 4 months ago
The PTT on this microphone is working fine on a Yaesu rig but not on the Flex 6700.
When I use MOX to transmit the audio is good so that bit works fine.
I have looked at the pin outs for microphone and Flex both seem to be the same.
Help!
Photo of Jeff ODowd

Jeff ODowd

  • 5 Posts
  • 0 Reply Likes

Posted 4 months ago

  • 1
Photo of Chris DL5NAM

Chris DL5NAM

  • 659 Posts
  • 148 Reply Likes
Do you realy need help for this big problem?

Sorry
Photo of Michael Walker

Michael Walker, Employee

  • 671 Posts
  • 197 Reply Likes
Does the Flex Hand Mic work on the 6700 as expected?

Mike

Photo of Jeff ODowd

Jeff ODowd

  • 5 Posts
  • 0 Reply Likes
The Flex hand mic works perfect
Photo of Jeff ODowd

Jeff ODowd

  • 5 Posts
  • 0 Reply Likes
This is very frustrating. The hand mike works fine, the M100 Mike works fine on a Yaesu. The M100 PTT won’t work on the Flex 6700. I’ve checked the pin outs and they appear to be the same.
Someone must have come across this before.
Come on Flex you must have come across this before.
Photo of Mike  W1BFA in Maine

Mike W1BFA in Maine

  • 106 Posts
  • 11 Reply Likes
silly question, but I have done it...  is the lock button on the top of the barrel of the mic pushed?

Mike W1BFA
Photo of Johan / SE3X

Johan / SE3X

  • 108 Posts
  • 38 Reply Likes

Sure you have choosen the correct mic input? I use either a Shure via balanced or headset via frontpanel jack on my 6700. Need to remember to chose the correct one depending on input. Easy to oversee ..
(Edited)