Flex 6600M Input and Output Impedance Specifications

  • 1
  • Question
  • Updated 1 year ago
  • Answered

I am in the process or integrating my new Flex 6600M into my ham shack.

I need to know the input and output impedances of the audio I/O to this radio to design the pads  between the radio and my somewhat sophisticated audio system.   Are these specifications already published or can they be made available?

Photo of Geoff - W8GNM

Geoff - W8GNM

  • 49 Posts
  • 6 Reply Likes

Posted 1 year ago

  • 1
Photo of Thomas NE7X

Thomas NE7X

  • 57 Posts
  • 11 Reply Likes
Official Response
Microphone input is 600 ohms.  See the Spec tab on the FLEX-6400 product webpage.
http://www.flexradio.com/amateur-products/flex-6000-signature-series/flex-6400/

  • Microphone Connector: Pseudo Balanced 1/8" TRS
  • Microphone Impedance: 600 Ohms Nominal (200-10kΩ)
Photo of k0eoo

k0eoo

  • 621 Posts
  • 87 Reply Likes
There is some info in the prelim hardware manual page 27 and 28:

http://www.flexradio.com/downloads/flex-6400-and-flex-6600-hardware-reference-manual-pdf/

This conversation is no longer open for comments or replies.