Flex 6500 with SSDR 1.4 Shuts down on transmit with large error message.

  • 1
  • Problem
  • Updated 4 years ago
  • In Progress
After installing SSDR 1.4 all was  working well. After leaving the radio and computer run overnight SSDR shuts down any time I try to transmit. This only occurs using version 1.4. I downgraded to 1.3.8 and it is working. I re installed 1.4 and the shut down problem continues.

I am using a 6500 and running Windows 7 Pro 64 bit.

Here is the error message. I thought I saw a similar problem posted right after 1.4 came out but I can't find it.

I'm not sure what to try next.

Thanks,

Paul W5PF


Photo of Paul W5PF

Paul W5PF

  • 47 Posts
  • 4 Reply Likes

Posted 4 years ago

  • 1
Photo of Ed.G

Ed.G, Software Engineer

  • 88 Posts
  • 20 Reply Likes
Official Response
I believe this is the Hardware ALC issue noted before. 

If you disable the "Hardware ALC" checkbox under "Settings->Radio Setup->Transmit Tab" I think this will fix it in the meantime. 

We have fixed this in the next version of SmartSDR.