Flex 6400/Maestro output to TV hookup

  • 1
  • Question
  • Updated 1 week ago
I would like to put my Maestro screen up on a 32" TV as well.  What is the method to do this in terms of the setup on the 6400?  Anybody know the output resolution of the 6400...4K?  Thanks!
Photo of Joseph Hill

Joseph Hill

  • 15 Posts
  • 1 Reply Like

Posted 1 week ago

  • 1
Photo of Michael Walker

Michael Walker, Employee

  • 493 Posts
  • 120 Reply Likes
Official Response
Hi 

The only way to do this is with the 6400M model.  It can't be done with the Maestro or a non M model unless you use SmartSDR on your computer and have it on an additional monitor.

The non-M models and the Maestro do not have any other video out options.

Mike

Photo of Craig - KØCF

Craig - KØCF

  • 154 Posts
  • 50 Reply Likes
I would suggest that you download the 6400 manual from the Flexradio web site. It is all very clearly described in there. There is a download link at the top of the home page, or this link will get you directly to the download page:
https://www.flexradio.com/downloads/


Photo of K1UO - Larry

K1UO - Larry

  • 819 Posts
  • 132 Reply Likes
GM Joeseph,,

I am making an assumption that you are talking about a Maestro or a 6400M/ Model Flex?
1:  A maestro by itself is a standalone display/control unit and does not have the facilities to also be connected to an external display.
2:  The same applies to a straight Model 6400 or 6600 radio (Non-M series) .
3:  Only the 6400 or 6600M models are equipped with an external displayI port with 1920X1200 resolution that allows you to have both the front panel Maestro display and an external display at the same time.
Hope this helps
73  Larry  k1UO

You guys are fast!!  or I am a slow typist :)  there were no responses when I started typing.....
(Edited)