Flex-6300 RX antenna switching not following TX Band

  • 1
  • Question
  • Updated 1 year ago
  • Answered
I have a Flex-6300 running version 2.133.106.

When I'm running two panadapters, say slice A on Panadaptor 1 for 80M and slice B on Panadaptor 2 for 40M, it does not seem possible to save a different default RX antenna for each band.

I appreciate that with a single SCU it is only possible to have one RX antenna in use at any time across both panadaptors and slices. But I would like to have the option of setting a different default RX antenna for each band and for this to be switched in when the relevant slice is activated for TX. Is this not possible, or have I overlooked a configuration setting somewhere?
Photo of Brian VK3MI

Brian VK3MI

  • 9 Posts
  • 1 Reply Like

Posted 1 year ago

  • 1
Photo of Mike Hoing

Mike Hoing

  • 270 Posts
  • 43 Reply Likes
I believe your observation is correct. That radio only has one SCU so one antenna is all you can get. The SCU digitizes the signals and can only hook to one antenna at a time. The 6600s and 6700s have two SCU but carry a much higher price point.

In summary, your radio is performing as expected

Mike, NN9DD
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9178 Posts
  • 3525 Reply Likes
Mike is 100% correct.
Photo of Rich McCabe

Rich McCabe

  • 1105 Posts
  • 238 Reply Likes
Exactly right.  You can switch to the other RX antenna manually though when you switch on the TX. Just another mouse click operation.

I am not a DDUTIL user but would think you could setup a Macro to do what you desire.


This conversation is no longer open for comments or replies.