Flex-3000 PTT in invokes transmit but no RF output

  • 1
  • Problem
  • Updated 9 months ago
  • Solved

Hi
Ive owned my Flex 3000 since 2012.
Ive always used the gui to switch to transmit by clicking MOX.

I recently acquired a footswitch but seem to have a problem
I connect the footswitch to the PTT in on the back panel of the Flex.
I depress the switch and all looks well, MOX illuminates on the GUI and I appear to get the typical TX display.
However there is no output when speaking into the microphone its almost as though the mic is muted. There is no RF output.
If I click MOX on the GUI with the mouse everything works as it should.
Please help

Stuart Binns M0STF
Photo of Stuart Binns

Stuart Binns

  • 7 Posts
  • 2 Reply Likes

Posted 9 months ago

  • 1
Photo of Stuart Binns

Stuart Binns

  • 7 Posts
  • 2 Reply Likes
Official Response
Hi All
THIS IS NOW RESOLVED.
Thanks for your help.
In Setup - Audio - VAC - Allow PTT to override VAC for phone needed to be unchecked as I am using VAC ie pc mic and headphones.
Thanks again
Stu