Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

SmartSDR v3.7.4 and the SmartSDR v3.7.4 Release Notes | SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.8.8 and the Power Genius XL Release Notes v3.8.8
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

external keying line delay for f3k

Options
John
John Member ✭✭
edited June 2018 in FLEX Series (Legacy) Radios
I cannot get this delay to work and wonder if its an old issue

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited October 2017
    Options
    A detailed description of what you have done and the resulting behavior you are observing will assist in getting feedback.
  • John
    John Member ✭✭
    edited June 2018
    Options
    Hi Tim,
    I have been un-successful in getting this delay line to work with both the old version pf psdr as well as the latest version from Darrin. I completely un-installed both versions then installed the old version and tried it and then installed Darrin's version but still no go. Its not a serios issue as I can work around it with ptt circuits in the projects. Darrin said that his only worked when he ticked the button a couple of times, but not for me.

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited October 2017
    Options
    Can you send me a screenshot of the delay setting?  I want to see the entire Setup panel where you have the value set.
  • John
    John Member ✭✭
    edited June 2018
    Options
    Just made a screen grab and will attach it. Off to bed as early start tomorrow

    Johnimage
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited November 2017
    Options
    You have it set up correctly.

    I doubt that you could determine a 1ms delay without using a scope.

    So how this works is if you set the delay, once you assert PTT, the radio will key the amp or whatever device is connected to the TX RELAY immediately and will delay sending RF by the time value selected.  I just tested it with a 999ms delay and verified that RF output was delayed by approximately a second.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories