External GPSDO products and projects

  • 1
  • Question
  • Updated 11 months ago
I use a 6500, have had it for about 2+ years and having a ball with it. I added a Jackson Labs GPSDO mainly just to be dead nuts balls accurate and because I could. Most if not all of these can also be used to create time servers such that when operating portable you could have a timing reference for FT8.

I'm finding a few products out there that today would be less expensive alternative to my Jackson http://www.jackson-labs.com/index.php/products/lc_xo_plus_kit at $600+ such as

at $170 (friend is using this one on his IC7610) https://www.ebay.com/itm/NEW-10MHZ-SINE-WAVE-GPS-DISCiPLINED-CLOCK-GPSDO-with-LCD-Display-Frequency/263627123794?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

at $90 https://www.ebay.com/itm/NEW-10MHz-Sinwave-PLL-GPSDO-GPS-DISCIPLINED-OSCILLATOR-adapter-GPS-ANT/2620...

What other GPSDO products or projects are out there?

Photo of Tom

Tom

  • 33 Posts
  • 2 Reply Likes

Posted 1 year ago

  • 1
Photo of Craig Williams

Craig Williams

  • 240 Posts
  • 74 Reply Likes
Photo of Rory - N6OIL

Rory - N6OIL

  • 301 Posts
  • 55 Reply Likes
When using these external GPSDO does the software see them?
Photo of Jon - KF2E

Jon - KF2E

  • 687 Posts
  • 230 Reply Likes
From the hardware reference manual...

The radio can use the external 10MHz reference, the optional GPSDO reference, the internal TCXO reference, or choose among them automatically. When set to automatic mode, the radio prioritizes the reference signals in External, GPSDO and TCXO order. In automatic mode, the radio watches for the appearance or disappearance of reference signals and chooses the highest priority available signal. In manual mode, the radio uses the selected input whether a signal is present or not.





Photo of Rory - N6OIL

Rory - N6OIL

  • 301 Posts
  • 55 Reply Likes
See, I just need to RTFM!
Photo of James Skala

James Skala

  • 107 Posts
  • 25 Reply Likes
I'm wanting to buy a external gpsdo for my flex 6400.

If you have purchased one will you please send me the link and reviews.
(Edited)
Photo of John Culliton

John Culliton

  • 37 Posts
  • 3 Reply Likes
I use the BG7TBL GPSDO with my 6500. It just works. Available on Ebay or Amazon
Photo of Don N

Don N

  • 9 Posts
  • 1 Reply Like
I use one made by Leo Bodnar. He has a couple of models, one with 2 ports, the other a single output. They are strictly for providing a clock, no NTP functions. The good thing though are the wide freqs out, 800 hz to somewhere north of 800mhz, i forget right now. They can run off a battery if you need to use as a simple source to test antennas, placed out across the yard.... poor mans test range. The 2 port model has semi independent selection of freq for each port, though #2 selections depend on #1 setting. I use the 2 port to clock the Flex and a DEMI 432 xvtr. I think the single port model is about $145 or so. They are about the size of a deck of cars. Try Airspy.com or this link if you like
http://www.leobodnar.com/shop/index.p...

73, Don
Wd4egf
Photo of John  - W8AGS

John - W8AGS

  • 48 Posts
  • 13 Reply Likes
I also use the one by Leo Bodnar. I use one output for the Flex 6600 and other for Flex 5000. The antenna that came with it works very well. The antenna is inside on the 2nd floor. Has no trouble receiving and locking on to the satellites. Bought it from AirSpy.com. Very satisfied with it.
73, and Happy New Year.

John, W8AGS
Photo of Michael Walker

Michael Walker, Employee

  • 1112 Posts
  • 328 Reply Likes
I know of many who use this one.  https://www.ebay.com/itm/NEW-10MHz-Sinwave-PLL-GPSDO-GPS-DISCIPLINED-OSCILLATOR-adapter-GPS-ANT/2620... for $89.  

I have used it to find a PLL signal to my modified transverter and it has been fine.

Mike 
Photo of ka7gzr

ka7gzr

  • 221 Posts
  • 37 Reply Likes
I have used Tindie https://www.tindie.com/ GPS products are very good. Geppetto Electroncs puts out  well documented GPSDOs.
I feed the GPS output into a Down East  Microwave https://www.downeastmicrowave.com/ (DEM Model 10-4)  for a reference for multiple devices.
Jim
ka7gzr
(Edited)