Expert Amp "Operate" On via SmrtSDR or iOS Interface?

  • 1
  • Question
  • Updated 2 years ago
  • Answered
Photo of Tom O'Boyle

Tom O'Boyle

  • 12 Posts
  • 3 Reply Likes

Posted 2 years ago

  • 1
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2254 Posts
  • 879 Reply Likes
Not possible, and likely not going to happen since Flex has the power Genius XL and that is their integrated solution. 

You can set up a windows PC with either DDUtil or the TERM software from SPE and rdp/vnc into it. 
Photo of Tom O'Boyle

Tom O'Boyle

  • 12 Posts
  • 3 Reply Likes
Thanks.  I was hoping for something within the interface.  I think I can make that happen.
Photo of Ria - N2RJ

Ria - N2RJ, Elmer

  • 2254 Posts
  • 879 Reply Likes
I really hope Flex opens up the amp control API, this way there could be some (limited) control of third party amps down the road.
(Edited)
Photo of Tom O'Boyle

Tom O'Boyle

  • 12 Posts
  • 3 Reply Likes
Yes, agreed.  Thanks for the comments.
Photo of Tom O'Boyle

Tom O'Boyle

  • 12 Posts
  • 3 Reply Likes
Yes, I know how to do it outside of the SmartSDR interface.  Lots of options there.  I was trying to see if it could be done inside of the SDR interface.  Thanks, Tom