ERROR PSH5V3-5.69

  • 1
  • Question
  • Updated 2 years ago
  • (Edited)
When starting a radio error pops up. ( ERROR PSH5V3-5.67)
Has anyone had a similar problem in your Flex 6500.
Reset procedure does not work.
Photo of SP5LMT

SP5LMT

  • 5 Posts
  • 0 Reply Likes

Posted 2 years ago

  • 1
Photo of Alex - DH2ID

Alex - DH2ID, Elmer

  • 878 Posts
  • 157 Reply Likes
That could be a power supply error.

1) Check your power supply for 13,8V or change it.
    I found this: https://community.flexradio.com/flexradio/topics/shutting_down_error_psh5v3_5_87_when_powering_on_sh...

2) Does the error still persist?

3) Then you should submit a HelpDesk support ticket here:
https://helpdesk.flexradio.com/hc/en-us

BTW I did'nt find a published error code list. Does anybody have one?
It would really be help to track down an error source!

Alex - DH2ID
(Edited)
Photo of SP5LMT

SP5LMT

  • 5 Posts
  • 0 Reply Likes
Power supply 13.9V
I checked on the two power supplies is the same. (Samlex 1235 and TEN-TEC-965 )
ICOM -9100 100W with two power supplies.
(Edited)
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9022 Posts
  • 3423 Reply Likes
This is a hardware error. I recommend opening a support HelpDesk ticket (http://helpdesk.flexradio.com) for expedited issue resolution.  If anyone else is experiencing an issue similar to this one, please submit a HelpDesk support ticket for issue resolution.