SmartSDR v3.7.4 and the SmartSDR v3.7.4 Release Notes | SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.8.8 and the Power Genius XL Release Notes v3.8.8
Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
Antenna Genius Utility v4.1.8
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Elecraft MD2 "Heil Sound" Mic to Flex 1500
would like to wire up an adaptor to work with Flex 1500. The only button on the mic is the PTT. My understanding is the resister was added on the MD2 to increase auido level so it might not be necessary when connected to the Flex 1500.
The Elecraft MD2 pin out is: Flex 1500 pin out:
1=AF (5.6K resister to 5V) 1=N.C.
2=PTT 2=N.C.
3=N.C. 3=5V
4=N.C. 4=Mic(-) Mic ground?
5=N.C. 5=Mic (+)
6=5V 6=PTT
7=GND 7=Chassis Ground (PTT GND)
8=GND (PTT GND) 8=N.C
Would the correct wiring be?
MD2 Flex
1=AF (5.6K resister to 5V) 5=Mic (+)
2=PTT 6=PTT
6=5V 3=5V
8=GND (PTT GND) 7=Chassis Ground (PTT GND)
7=GND 4=Mic (-) Mic ground?
Im worried about the resister applying voltage to pin 5 on the Flex.
I would appreciate any input.
Regards,
Robert
KD7YDW
Answers
-
This is a condenser type mic so it needs the +5VDC bias on the mic+ line. You do not need the mic bias resister (it is already installed in the 1500 along with a filter cap) and jumper blocks installed, so the mic will need to be configured for a K3 not a K2. I think this will work, but no promises as I don't have one of these mics to try out.
Mic Connector to FLEX-1500
1 Mic audio, low-Z (~600 ohms) -> 1500 pin 5 (mic+)
2 PTT -> 1500 pin 6
3 DOWN button
4 UP button
5 FUNCTION button
6 8V (10 mA max) -> 1500 pin 5
7 Ground -> 1500 pin 4
8 Ground -> 1500 pin 7
0 -
You have mic pin 6 (8v) going to 1500 pin 5 (mic+). Did you mean to have mic pin 6 (8v) going to 1500 pin 3 (5V)?0
Leave a Comment
Categories
- All Categories
- 246 Community Topics
- 2.1K New Ideas
- 489 The Flea Market
- 7.1K Software
- 5.9K SmartSDR for Windows
- 134 SmartSDR for Maestro and M models
- 331 SmartSDR for Mac
- 243 SmartSDR for iOS
- 222 SmartSDR CAT
- 163 DAX
- 348 SmartSDR API
- 8.6K Radios and Accessories
- 6.9K FLEX-6000 Signature Series
- 766 Maestro
- 41 FlexControl
- 836 FLEX Series (Legacy) Radios
- 733 Genius Products
- 393 Power Genius XL Amplifier
- 255 Tuner Genius XL
- 85 Antenna Genius
- 229 Shack Infrastructure
- 153 Networking
- 370 Remote Operation (SmartLink)
- 120 Contesting
- 583 Peripherals & Station Integration
- 115 Amateur Radio Interests
- 813 Third-Party Software