Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Easy BCD / USB cable for Flex to control remote amps, switches

W9SN
W9SN Member ✭✭
edited July 2018 in New Ideas

Easy to make BCD cable for remote control antenna switch,
amps, ect.

I'm using this for one of my 6500's to control an Ameritron RCS12 remote coax switch.

Mouser: https://www.mouser.com/ProductDetail/ftdi/c232hm-edhsl-0/?qs=EB8w3yL7SqPZGmdI8JhrMA%3d%3d&countr...

Part # 895-C232HM-EDHSL-0

Also a nice DB9 with clam shell and **** terminals inside for easy hook up https://www.mouser.com/ProductDetail/adafruit/3122/?qs=Fe2pGbCwd5cXidCv%252bHmXhw%3d%3d&countryc...

Part # 485-3122

To hook up, Pin 1 - Yellow, Pin 2 - Orange, GND - Black, Pin 8 - Black, Pin 9 Green.

Next set your USB in Flex 6xxx to BCD.

Whole process took 15 minutes to wire, configure and get working.

Hope this helps anyone that wants their Flex to control a BCD tracking item.

73's Steve W9SN www.BeLoud.US

Comments

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.