Dstar waveform disappears with SmartSDR 1.10.8

  • 1
  • Problem
  • Updated 2 years ago
  • In Progress
Did a miss something ?  I uninstalled the previous Dstar waveform and installed the new one .  After the install I was able to see Dstar in the list of options in the mode list.  A few minutes later I noticed I had a message that SmartSDR had lost contact with the 6300.  After a reboot of SSDR I noticed that DSTAR was not a option I could select in SmartSDR.  A couple more reboots, Dstar was back.  Keeping an eye on things now to see how long this Dstar connection lasts 
Andy K3UK
Photo of Andrew O'Brien

Andrew O'Brien

  • 379 Posts
  • 43 Reply Likes

Posted 2 years ago

  • 1
Photo of Ed.G

Ed.G, Software Engineer

  • 86 Posts
  • 20 Reply Likes
Official Response
Under SETTINGS>>>USB CABLES the DSTAR cable should show "disabled" or not be present at all in order to work correctly since it isn't considered a 'usb cable' from the software perspective.

It sounds like the waveform itself might have a problem. I'll investigate.