demi LDPA 25 setup problem

  • 1
  • Question
  • Updated 3 years ago
  • Answered
I have been trying to setup my transverter with my 6500 I have the XVTR port on the flex connected to the TRANS port on the DEMI ,the ant port on the DEMI to my 2mtr antenna. also setup the XVTR band in radio setup with 144.000 for the RF Freq, 28.000 for the IF Freq,116.000 for the LO Freq. when I open that slice the rec freq is at 142.015. but I do not seem to be connected to the antenna. as power cycling the DEMI or turning the preamp (in my 2mtr amp)on does not change the noise or signal.
what am I doing wrong?
Darrell/k5wid
Photo of darrell montgomery

darrell montgomery

  • 9 Posts
  • 0 Reply Likes

Posted 3 years ago

  • 1
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9130 Posts
  • 3454 Reply Likes
Official Response
Roy is correct.  The 2MLDPA-25 is not a transverter, but a 2m amplifier designed for the FLEX-6700.

https://helpdesk.flexradio.com/hc/en-us/articles/203119095-DownEast-Microwave-4-2m-Power-Amps-for-th...