DAX Is Forgetful

  • 1
  • Problem
  • Updated 6 years ago
  • Solved
I operate mostly on the digital modes, especially JT65 and JT9. I
often have just one panadapter and one slice enabled. I use DAX Channel 1
for both transmit and receive. I often leave the radio on overnight so
that I am ready to go in the morning (I at least shut down the monitors
to save on the electricity bill). I have noticed that in a number of
cases, DAX Channel 1 has forgotten that transmit was enabled on that
channel and thus I get no power out until I remember to check the DAX
control panel. This is not a case of persistence as the radio is not
shut down overnight.

Ed, K0KC



Photo of Ed, K0KC

Ed, K0KC

  • 288 Posts
  • 20 Reply Likes

Posted 6 years ago

  • 1
Photo of NM1W


  • 136 Posts
  • 24 Reply Likes
I've noticed that if I leave computer for say 20-30min  the dax settings have swtiched...
I'll post a new comment about the issues I've been having with just getting dax to work each morning..
Photo of Steve - N5AC

Steve - N5AC, VP Engineering / CTO

  • 1057 Posts
  • 1097 Reply Likes
Official Response
Yes, this was driving me crazy too.  We spent a day tracking down the issue and fixed it ... we will be providing a maintenance release with this fix in it soon.
Photo of Ed, K0KC

Ed, K0KC

  • 288 Posts
  • 20 Reply Likes
Sounds good, Steve...Thanks!

Ed, K0KC

This conversation is no longer open for comments or replies.