DAX Is Forgetful

  • 1
  • Problem
  • Updated 4 years ago
  • Solved
I operate mostly on the digital modes, especially JT65 and JT9. I
often have just one panadapter and one slice enabled. I use DAX Channel 1
for both transmit and receive. I often leave the radio on overnight so
that I am ready to go in the morning (I at least shut down the monitors
to save on the electricity bill). I have noticed that in a number of
cases, DAX Channel 1 has forgotten that transmit was enabled on that
channel and thus I get no power out until I remember to check the DAX
control panel. This is not a case of persistence as the radio is not
shut down overnight.

Ed, K0KC


Back

 


Photo of Ed, K0KC

Ed, K0KC

  • 264 Posts
  • 19 Reply Likes

Posted 4 years ago

  • 1
Photo of Steve - N5AC

Steve - N5AC, Employee

  • 1019 Posts
  • 984 Reply Likes
Official Response
Yes, this was driving me crazy too.  We spent a day tracking down the issue and fixed it ... we will be providing a maintenance release with this fix in it soon.