Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

dax install problem - no RX sound devices

Bill - K7UOP
Bill - K7UOP Member ✭✭
edited December 2016 in SmartSDR for Windows

Windows 7, SmartSDR 1.1.3, during install got message saying "Error occurred while trying to open a DAX driver. ..."  I am upgrading from v1.0.5. During install a Cmd.exe window opened and it took a while to load DAX drivers. DAX Control Panel v1.0.4.42 runs, but I again get the above message when I select an audio stream. The stream connects and displays in the panel.

Looking in the Win7 Sound Control Panel, I see DAX IQ RX1-4, DAX TX1-8 but -NO- DAX RX1-8 RESERVED or otherwise.

Running the v1.1.3 installer or reboot, etc. did not install missing sound devices. The Cmd.exe flashes by without pausing during re-install.

I use DAX for receive audio on this computer. How should I proceed?

Comments

  • Dave -- W5DJB
    Dave -- W5DJB Member ✭✭
    edited December 2016
    Bill, I had this problem when I moved to 1.1.0. Uninstalled the upgrade AND the DAX drivers. After reinstalling everything worked fine. That's now my SOP and it worked well moving.to 1.1.3. Dave
  • Bill - K7UOP
    Bill - K7UOP Member ✭✭
    edited February 2014


    A painless solution. Thanks Dave. When using the Windows 7 Programs & Features control panel to uninstall v1.1.3 I was prompted if I wanted to uninstall DAX drivers (yes in this case). After restart, installation went smoothly.  - Problem solved. -

    I was concerned about the effects of un-installing SmartSDR, so I was reluctant to try that without asking. The Release notes have always said un-installing previous versions was not necessary or recommended. Have always wondered what ill effects might occur.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.