DAX Control Panel v1.0.2.22

  • 2
  • Problem
  • Updated 5 years ago
  • Solved
KF2T George F6.5K, Fldigi, Win8.
W4EG (me) tried to get my F6.7K, HRD v6.1.4.189 build 3798, Win7 to populate the Audio Stream,
I tried all the possible settings with HRD and WSJT and none worked.
I have handshake with HRD PTT and the Rig control appears to be working.
No RF appears when I enable the transmitter and there is no audio integrating the received band activity area.



Note that his on slice 1 is properly id as "Slice A" "Rate 1565" - KF2T photo



W4EG no matter how I configured DAX it never change.

Also, I noticed that the DAX Control Panel would not appear in the lower right task bar. I had to install it from C:\Program Files\FlexRadio System\SmartSDR beta_v1.0.24\DAX\DAXWPF
And the answer is NO it was not in All Program\FlexRadio System folder either.
It took 3 download to get it to work. On the first 2 DAX download it was a no show and no run .
One head I could say "I did not read the instructions but two; I kind it doubt it"

I am on hold with DAX until this is resolve.
Photo of Ernest - W4EG

Ernest - W4EG

  • 594 Posts
  • 116 Reply Likes
  • confident FRS has an answer,

Posted 5 years ago

  • 2
Photo of Steve - N5AC

Steve - N5AC, VP Engineering / CTO

  • 1030 Posts
  • 1001 Reply Likes
Did you select DAX channel 1 in the slice you are trying to listen to?
Photo of Steve - N5AC

Steve - N5AC, VP Engineering / CTO

  • 1030 Posts
  • 1001 Reply Likes
Also let me know if you have more than one radio on your network
Photo of Ernest - W4EG

Ernest - W4EG

  • 594 Posts
  • 116 Reply Likes
Hi Steve,
Sold all the PDSR radios. I only have the one F6.7GPSDO LE. Dedicated computer and no other device not related to SmartSDR.
KF2T and I tried connecting to 1 in the beginning. We tried so many times and nothing happened. Then we switched many times to other slices with similar results. I performed a radio reset; no change.
I just got home and will try this afternoon and see what happens before I summit a report to have FRS take a look at it.
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3471 Reply Likes
Ernest - W4EG: Is this still a problem?
Photo of Ernest - W4EG

Ernest - W4EG

  • 594 Posts
  • 116 Reply Likes
No Tim...
KF2T George in Vegas helped me solved the problem. (failed to read TIM)
Thank you for asking.

(For those in Rio Linda TIM = The Instruction Manual)
Photo of Tim - W4TME

Tim - W4TME, Customer Experience Manager

  • 9152 Posts
  • 3471 Reply Likes
Great! Thanks for letting me know.

This conversation is no longer open for comments or replies.