DAX JT-65 Issues

  • 1
  • Problem
  • Updated 3 years ago
  • Acknowledged
I usually have multiple JT-65 instances running each on a different slice. The problem is when switching to a different "TX" slice the radio drops does not recognize the new channel. Clicking on the JT-65 TUNE button for the new instance I see audio on the DAX panel going out on the new channel but the radio does not transmit. I am using VOX to trigger the transmitter. The fix is to click on the ATU or maybe TUNE button or sometimes the VOX button. Seems like almost any button on the radio control panel will reconnect the radio to the new DAX channel. Both slices are in DIGU mode.

I had this issue with 1.38 as well.
Photo of Bill W2PKY

Bill W2PKY

  • 451 Posts
  • 79 Reply Likes

Posted 3 years ago

  • 1
Photo of Steve - N5AC

Steve - N5AC, VP Engineering / CTO

  • 1030 Posts
  • 999 Reply Likes
Official Response
Bill, thanks for the report -- I don't think we've seen this issue before so it's a new one for us.  I've entered it in our tracking system as #1791.  Thanks